Description
The TMC 63-500 Series high-performance lab tables provide an excellent vibration-free working surface for loads up to 350 lbs (160 kg.). The table’s modular construction is ideal for any IVF procedure or any situation requiring exact vibration-free performance.
ORIGIO will configure the table to best match your needs.
Typical options include the following. For a full range of options, review the brochure.
- Front support bar
- Rear support bar
- Armrest pads
- Sliding shelves
- Rear shelf
- Casters
Key Features
- Exclusively designed for IVF and ICSI procedures
- Tested by an independent testing house, DELTA, for mechanical measurements and vibration
- Constructed in high density steel: adding mass to the table
- Microscope passively damped: which is placed on a platform that is isolated from the rest of the table plate
- Micromanipulation equipment placed next to themicroscope: vibrations from handling the micromanipulator do not transfer to the microscope
- Uses VIBe™ Series IB isolator bearings: the isolation bearings are mechanical, passive devices that dampen the transmission of vibration
Product Specifications
| Isolator natural frequency | High Input: Vertical = 1.2 Hz Horizontal = 1.0 Hz Low Input: |
| Isolation efficiency @ 5 Hz | Vertical = 70 – 85% Hz Horizontal = 75 – 90% Hz |
| Isolation efficiency @ 10 Hz | Vertical = 90 – 97% Hz Horizontal = 90 – 97% Hz |
| Recommended payload | 350 lb (160 kg) |
| Finish | Medium texture black powder coat frame, stainless steel top |
| Facilities required | 80 psi (5.4 bar) nitrogen or air |
| Shipping weight | Approximately 600lb (272 kg) |
| Height control valves | Repeatability standard valve +/- 0.050 in. (1.3 mm) Precision valve: +/- 0.005 in. (0.13 mm) |
Order Codes
| Reference | Description |
|---|---|
| TMC-3TBL | TMC 3 feet Anti-Vibration Table |
| TMC-4TBL | TMC 4 feet Anti-Vibration Table |
